CARS FOR PARTS

All automobiles that were bought for parts dismantling in any of the US states would be delivered to our warehouse in N.J. where dismantling will occur. That is why it makes sense to buy cars in states that are closer to N.J. Our Company can ARRANGE THE TRANPORTATION TO OUR WAREHOUSE AT COMPETITIVE RATE. It will give us time in advance to schedule dismantling and shipping procedures.

 

There are 3 ways of cutting cars and loading its parts into a container:

Option #1 is most saving.  Automobile is cut across onto 2 parts at the level of its rear seats (this option is beneficial for those cars that have minimal visible damage). Using this option you will be able to save many parts in good condition for selling.  

In this case you will be saving front and rear windows, all removable body parts, sunroof, roof airbags, parking brake cables and muffler.

In option#1 we will be able to load up to 6 cut cars (depending on size of cars), that will be secured by wooden rails, which excludes damage during transportation. $300 for dismantling, $70 for loading of one half in container.

 

 

 

 

 

 

 

 

Option #2 is more economical. In this case we load from 10 to 15 cut cars in one container. This way of cutting comparing to option # 1 is less effective in terms of saving body parts.

Second option is efficient if you are buying cars at the auction, for example with rear damage. In this case front part will be cut from the car (behind the front pillar, by the level of the steering wheel), front window will be saved this way).  In this case front part will consist of: car fenders, hood, whole front suspension, lights, dashboard with steering wheel, engine and automatic transmission. All doors will be taken off. Rear part will be dissembled, if it contains undamaged body parts (rear window, lights and ….. Whole rear suspension is taken off separately (if not damaged). If desired by client we also can cut some body parts such as rear quarter panels, middle pillar, roof and rails).

$350 for dismantling, $10 for each cut body part, $70 for loading of one half in a container. 

 

 

 

 

 

 

 

 

 

Option #3 is super economical. Car is completely dismantled. Main parts are taken off: engine and transmission, front an rear suspension, front and rear doors, hood, trunk lid, fenders and so on….All whole windows and quarter panel windows, dashboard, heater, steering column and interior are cut out. Body will be cut on pieces as desired by a client.

In this case container will fit about 20 cars depending on type of cars and its cut. This option is good for those who want to sell separate parts because you don’t need further dismantling.

 

 

 

 

 

 

 

$ 450 for dismantling, $700 for loading container, and $10 for each cut body part. 

Attention!!! Amount of cars in each option can vary depending on type of cars and presence of cut body parts. Body parts are typically big and require lots of space in container.

It is your decision to choose an option that suits your marketing needs, that’s why you have to consider all advantages and disadvantages of every given option.

Important: after purchasing cars that need to be cut on parts, you have to schematically mark with red lines places where you would like to have it cut on the auction pictures. You also have to mention those parts that need to be loaded. It is important to mention if you want gas tank, exhausts, damaged body parts, interior seats and so on to be loaded in container. This is done to prevent any confusion and provide our clients with a highest satisfaction. 

 

Attention!!! It is necessary to specify entire procedure of custom clearance of importing auto parts according to your national laws. Nobody will do it for you.